There are two models of the Wireless Keyless Entry System, the 66LM and the 976LM. The 976LM is for use only with Security+®  garage door openers having an orange/red smart/learn button. The 66LM will work with all openers manufactured since 1990 that have a yellow, white, gray, or green smart/learn button.  It will not work with Security+®  openers.

To program the keyless entry, first locate the smart/learn button. On our chain drive models, this button is on the end farthest from the door. On our belt and screw drive models, it is on the right side as you face the door from the opener.  You simply press and release the smart/learn button.  You now have 30 seconds to enter your four digit PIN number into the keypad and hold the enter button for five seconds.  Wait one minute and test the keyless entry by entering your four-digit PIN number and pressing enter.

With some Security+® models, you can also program your Model 976LM Wireless Keyless Entry without climbing a ladder, right from your Multi-Function Control Panel. Simply enter your pre-selected code and press and hold the enter button on your Keyless Entry. Then press and hold the light button and the pushbutton on your Multi-Function Control Panel. The garage door opener lights will flash to confirm that the Keyless Entry has been successfully programmed.